IKA C 7000 Grundausstattung Set 2 User Manual

Page 58

Advertising
background image

 (YDOXDWLRQ RI &DORULILF 9DOXH 7HVWV

IKA

-WERKE C 7000

Ver. 07 09.07

3DJH 

To edit the parameters of a particular test, proceed as follows:

c

Change from

PHQX 

to the sub-menu

HGLW

, by pressing function button

I

.

d

Enter the sample code to identify the test you wish to change.

e

Use the

or

buttons to go to one or more parameters and make the desired

corrections.

f

Store the new entries by pressing the

PHP

button. If you want to break off the pro-

cedure, press the

HVF

button. Changed values will then not be stored.

(UDVLQJ WHVW GDWD

To erase selected test data, proceed as follows:

c

Change from

PHQX 

to the sub-menu

GHO

, by pressing function button

I

d

Enter selection criteria for the date, sample code and sample status as described

above.

e

Close your entries by pressing the

PHP

button. The tests you have selected will be

erased from the memory.

By entering the following criteria, you can erase those tests that have already been

printed once:

selection criterion for date: "



"

selection criterion for sample code: "



"

selection criterion for sample status: "

SULQWHG

"

 (YDOXDWLRQ RI WHVWV

Evaluation of test data is dependent on the post-test parameters, which can only be

entered after a measurement. However, before making a measurement, the calcula-

tion mode must be selected (

PHQX   67,QLW  FDOFXO

). The available settings are

(see Section 6.6):

VWG  W

standard without titration

VWG  W

standard with titration

FRDO  W

carbon without titration

FRDO  W

carbon with titration

The formulae used for calculation are mostly drawn from DIN standards. They are

described in detail in the relevant standards.

The sub-menu

DIWHUS

has input fields for parameters which are dependent on the

calculation mode selected. Parameters that are determined with the sample in the

Advertising
This manual is related to the following products: