Electrocution hazards, Electrocution hazards -4 – JLG 600SC_660SJC Operator Manual User Manual
Page 14
SECTION 1 - SAFETY PRECAUTIONS
1-4
– JLG Lift –
3121606
• Before operating the machine, make sure all gates are closed
and fastened in their proper position.
• Keep both feet firmly positioned on the platform floor at all
times. Never use ladders, boxes, steps, planks, or similar items
on platform to provide additional reach.
• Never use the boom assembly to enter or leave the platform.
• Use extreme caution when entering or leaving platform. Be
sure that the boom is fully lowered. It may be necessary to
telescope out to position the platform closer to the ground for
entry/exit. Face the machine, maintain “three point contact”
with the machine, using two hands and one foot or two feet
and one hand during entry and exit.
Electrocution Hazards
• This machine is not insulated and does not provide protection
from contact or proximity to electrical current.