JLG 600SC_660SJC Operator Manual - Manual (Page 82)

SECTION 5 - EMERGENCY PROCEDURES
5-2 – JLG Lift – 3121606
5.3 EMERGENCY OPERATION
Operator Unable to Control Machine
IF THE PLATFORM OPERATOR IS PINNED, TRAPPED OR UNABLE TO
OPERATE OR CONTROL MACHINE:
1. Other personnel should operate the machine from ground
controls only as required.
2. Other qualified personnel on the platform may use the plat-
form controls. DO NOT CONTINUE OPERATION IF CONTROLS
DO NOT FUNCTION PROPERLY.
3. Cranes, forklift trucks or other equipment can be used to
remove platform occupants and stabilize motion of the
machine.
Platform or Boom Caught Overhead
If the platform or boom becomes jammed or snagged in over-
head structures or equipment, rescue platform occupants prior to
freeing the machine.