JLG 600SC_660SJC Operator Manual - Manual (Page 27)

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
3121606 – JLG Lift – 2-7
a. Activate hydraulic system. By depressing footswitch.
Operate Main Telescope and hold control. Remove foot
from footswitch, motion should stop. If it does not, shut
down machine and contact a certified JLG service tech-
nician.
b. With footswitch depressed, operate Lift and hold con-
trol. Remove foot from footswitch, motion should stop.
If it does not, shut down machine and contact a certi-
fied JLG service technician.
c. With engine power shut down, depress the footswitch.
Attempt to start engine. Engine should not attempt to
start when footswitch is depressed. If starter engages or
engine turns over, shut down machine and contact a
certified JLG service technician.
15. Auxiliary Power.
Operate each function control switch (e.g. Tele, Lift and
Swing) to assure that they function in both directions using
auxiliary power instead of engine power.
16. Ground Controls.
Place Ground/Platform Select switch to Ground. Start
engine. Platform controls should not operate.