JLG 600SC_660SJC Operator Manual - Manual (Page 62)

SECTION 4 - MACHINE OPERATION
4-10 – JLG Lift – 3121606
This machine is equipped with a Drive Orientation
Indicator. The yellow light on the platform control
console indicates that the boom is swung beyond
the rear and the machine may Drive/Steer in the
opposite direction from the movement of the con-
trols. If the indicator is illuminated, operate the Drive function in
the following manner:
1. Match the black and
white direction arrows
on both platform con-
trol panel and the chas-
sis to determine the
direction the machine
will travel.
2. Push and release the Drive Orientation Over-
ride switch. Within 3 seconds, slowly move the
Drive control toward the arrow matching the
intended direction of machine travel. The indi-
cator light will flash during the 3 second inter-
val until the drive function is selected.
4.5 PARKING AND STOWING
Park and stow machine as follows:
1. Park machine in travel position; boom lowered over rear, all
access panels and doors closed and secured, ignition off,
turntable locked.
2. Check that brakes hold machine in position.
3. Chock tracks front and rear.
4. Turn off Platform Select switch and remove key.
5. When parking on frozen ground overnight, drive the
machine up on boards to prevent freezing to the ground.