JLG 600SC_660SJC Operator Manual - Manual (Page 83)

SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121606 – JLG Lift – 6-1
SECTION 6. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6.1 INTRODUCTION
This section of the manual provides additional necessary infor-
mation to the operator for proper operation and maintenance of
this machine.
The maintenance portion of this section is intended as informa-
tion to assist the machine operator to perform daily maintenance
tasks only, and does not replace the more thorough Preventive
Maintenance and Inspection Schedule included in the Service
and Maintenance Manual.
Other Publications Available:
Service and Maintenance Manual
(S/N - 0300174703 to Present..................................................3121607
Illustrated Parts Manual
(S/N - 0300174703 to Present) ................................................3121608
6.2 OPERATING SPECIFICATIONS
Table 6-1. Operating Specifications
Maximum Work Load (Capacity) - ANSI
Unrestricted:
Restricted - 600SC
Restricted - 660SJC
500 lb. (227 kg)
1000 lb. (454 kg)
500 lb. (227 kg)
Maximum Work Load (Capacity) - CE & Australia
Unrestricted:
Restricted - 600SC
Restricted - 660SJC
500 lb. (230 kg)
1000 lb. (450 kg)
500 lb. (230 kg)
Maximum Travel Grade (Gradeability) * 55%
Maximum Travel Grade (Side Slope) * 5°
Max.Vertical Platform Height:
600SC
660SJC
60 ft. 3 in. (18.36 m)
66 ft. 8 in. (20.32 m)
Max.Horizontal Platform Reach:
600SC
660SJC
49 ft. 6 in. (15.09 m)
56 ft. 9 in. (17.3 m)
Turning Radius 0