11 oscillating axle lockout test (if equipped), 12 towing, 11 oscillating axle lockout test – JLG 800A_AJ Operator Manual User Manual
Page 78: If equipped) -16, 12 towing -16

SECTION 4 - MACHINE OPERATION
4-16
– JLG Lift –
3121209
NOTE: Crane and lifting devices, chains, slings, etc., must be
capable of handling the gross machine weight.
ABOVE IS MINIMUM WEIGHT. CHECK WEIGHT OF UNIT PRIOR TO LIFT-
ING.
NOTE: Lifting eyes are provided at the front and rear in the frame
slab. Each of the four chains or slings used for lifting
machine must be adjusted individually so machine
remains level when elevated.
SECURE TURNTABLE WITH TURNTABLE LOCK BEFORE TRAVELING
LONG DISTANCES OR HAULING MACHINE ON TRUCK/TRAILER.
4.11 OSCILLATING AXLE LOCKOUT TEST (IF
EQUIPPED)
LOCKOUT SYSTEM TEST MUST BE PERFORMED QUARTERLY, ANY TIME
A SYSTEM COMPONENT IS REPLACED, OR WHEN IMPROPER SYSTEM
OPERATION IS SUSPECTED.
Refer to Section 2.4, Oscillating Axle Lockout Test (If
Equipped) for procedure.
4.12 TOWING
The machine is not equipped with a tow package. Refer to
Section 5 for emergency towing procedures.