JLG M600 Operator Manual - Manual (Page 85)

SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121217 – JLG Lift – 6-5
Hydraulic Oil
NOTE: Hydraulic oils must have anti-wear qualities at least to API
Service Classification GL-3, and sufficient chemical stabil-
ity for mobile hydraulic system service.
Aside from JLG recommendations, it is not advisable to
mix oils of different brands or types, as they may not con-
tain the same required additives or be of comparable vis-
cosities. If use of hydraulic oil other than Mobil DTE 11M
is desired, contact JLG Industries for proper recommen-
dations.
Table 6-5. Hydraulic Oil
Hydraulic System
Operating
Temperature Range
S.A.E. Viscosity
Grade
+0? to + 180? F
(-18? to +83? C)
10W
+0? to + 210? F
(-18? to +99? C)
10W-20, 10W30
+50? to + 210? F
(+10? to +99? C
20W-20
Table 6-6. Mobil DTE 11M Specs
ISO Viscosity Grade #15
Gravity API 31.9
Pour Point, Max -40?F (-40?C)
Flash Point, Min. 330?F (166?C)
Viscosity
at 40° C 15 cSt
at 100° C 4.1 cSt
at 100° F 80 SUS
at 210° F 43 SUS
cp at -30° F 3.200
Viscosity Index 140