JLG M600 Operator Manual - Manual (Page 61)

SECTION 4 - MACHINE OPERATION
3121217 – JLG Lift – 4-15
Engaging after Towing is Complete
THE COVER IS UNDER SPRING FORCE
1. Remove the 2 hex head bolts securing the cover evenly
and remove the cover.
2. Rotate the cover 180 degrees and secure with the two
hex head bolts.
3. Torque the hex head bolts 6.3 ft.lbs. (8.8 Nm).
4. The gear drive should now be reengaged and the
machine can be disconnected from the towing vehicle.