JLG M600 Operator Manual - Manual (Page 39)

SECTION 3 - MACHINE CONTROLS AND INDICATORS
3121217 – JLG Lift – 3-7
5. Telescope Control
This switch allows extension and retraction of the main
boom.
6. Articulating Jib (If Equipped)
This switch controls the raising and lowering of the jib
(up or down).
7. Jib Rotate (If Equipped)
A three position switch permits rotation of the jib and
platform (left or right).
8. Platform Rotate
This switch controls the rotation of the basket (left or
right).
9. Function Speed Control
Controls the speed of Boom and Swing Functions.
Rotate CCW for slower speed and CW for faster speed.
To adjust to creep, turn knob fully CCW until it clicks.
10. Main Lift/Swing
The dual axis joystick is provided for main lift and swing.
Push forward to lift up, pull backward to lower. Move
right to swing right, move left to swing left. Proportional
control of these functions can be attained by using the
Function Speed control.
NOTE: Main lift and swing functions may be selected at the same
time. Maximum speed is reduced when both functions
are selected.