JLG M600 Operator Manual - Manual (Page 44)

SECTION 3 - MACHINE CONTROLS AND INDICATORS
3-12 – JLG Lift – 3121217
1. Tilt Alarm Warning Light and Alarm
This orange illuminator indicates that the chassis is on a
slope. An alarm will also sound when the chassis is on a
slope and the boom is above horizontal. If lit when boom
is raised or extended, retract and lower to below hori-
zontal then reposition machine so that it is level before
continuing operation. If the boom is above horizontal
and the machine is on a slope, the tilt alarm warning
light will illuminate and an alarm will sound and CREEP
is automatically activated.
IF TILT WARNING LIGHT IS ILLUMINATED WHEN BOOM IS RAISED OR
EXTENDED, RETRACT AND LOWER TO BELOW HORIZONTAL THEN
REPOSITION MACHINE SO THAT IT IS LEVEL BEFORE EXTENDING
BOOM OR RAISING BOOM ABOVE HORIZONTAL.
2. Platform Overload (If Equipped)
Indicates the platform has been overloaded.
1704239 E
+ -
1001110226A
+ -
7 9 6
1 5 4 3 8 2
1. Tilt
2. Platform Overload
3. System Distress
4. Posi-Track
5. Enable 6. Low Battery
7. Creep
8. Drive Orientation Override
9. Soft Touch Indicator
Figure 3-4. Platform Control Indicator Panel w/
Drive Orientation