JLG M600 Operator Manual User Manual
Page 60
Advertising
SECTION 4 - MACHINE OPERATION
4-14
– JLG Lift –
3121217
3. Rotate the cover to show the inside diameter
4. Install the bolts and torque 6.3 ft. lbs. (8.8 Nm) until they
are flush with the cover.
5. The machine is ready to be towed.
BEFORE THE MACHINE IS SEPARATED FROM THE TOWING VEHICLE,
EITHER THE DRIVE HUB HAS TO BE REENGAGED OR PROPER STEPS
MUST BE TAKEN TO PREVENT THE MACHINE FROM MOVING.
COVER
COVER
ROTATED
Advertising
This manual is related to the following products: