JLG M600 Operator Manual - Manual (Page 82)

SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6-2 – JLG Lift – 3121217
Machine Length
E/M600
E/M600J
E/M600JP
30 ft. 11 5/16 in. (9.43 m)
30 ft. 8 15/16 in. (9.37 m)
33 ft. 3 3/4 in. (10.15 m)
Turning Radius (outside) 15 ft. 3 in. (4.65 m)
Turning Radius (inside) 4 ft. (1.23 m)
Maximum Tire Load: 7700 lbs. (3493 kg)
Maximum Ground Bearing Pressure
E600J/M600J
E600JP/M600JP
52 psi (3.7 kg/cm 2)
51 psi (3.6 kg/cm 2)
Maximum Drive Speed: 3.0 mph (1.3 m/s)
Electrical System Voltage 48 volts
Maximum Hydraulic System Pressure 3200 psi (221 Bar)
Maximum Wind Speed 28 mph (12.5 m/s)
Maximum Manual Force 400N
Table 6-1. Operating Specifications - Prior to S/N 0300141450
Gross Machine Weight (Platform Empty)
Prior to S/N 0300104944
E600J/M600J
E600JP/M600JP
16,300 lb. (7,393 kg)
16,800 lb. (7,620 kg)
Gross Machine Weight (Platform Empty)
S/N 0300104944 to Present
E600J/M600J
E600JP/M600JP
16,710 lb. (7,580 kg)
17,210 lb. (7,806 kg)
Table 6-2. Operating Specifications - S/N 0300141450 to
Present
Maximum Work Load (Capacity)
ANSI Markets
Unrestricted:
500 lb. (227 kg)
Maximum Work Load (Capacity)
CE & Australia Markets
Unrestricted:
500 lb. (230 kg)
Maximum Travel Grade (Gradeability)
with Boom retracted and approximately
horizontal. Tower Boom fully lowered. 30%
Maximum Travel Grade (Side Slope) with
Boom retracted and approximately hori-
zontal. Tower Boom fully lowered.
5°
Table 6-1. Operating Specifications - Prior to S/N 0300141450