JLG E300 Service Manual - Manual (Page 14)

SECTION 1 - SPECIFICATIONS
1-2 – JLG Lift – 3120772
1.3 BATTERY CHARGER
1.4 DRIVE SYSTEM
1.5 TIRES
1.6 HYDRAULIC FILTER
1.7 HYDRAULIC PUMP/ELECTRIC MOTOR
ASSEMBLY
1.8 DIMENSIONAL DATA
Table 1-5. Battery Charger
Input 110 VAC,60 HZ
Output 48 VDC (23 Amps)
Batteries (8) 6 Volt, 370 AmpHour (20 hour rate)
Table 1-6. Drive System
Drive Motor 48 VDC, 12.5 H.P. @ 3200 rpm.
continuous, rotation - reversible
Drive Brake spring-applied, hydraulically
released
Table 1-7. Tire Specifications
Size 7.5 x 12
Compound Non Marking Compound
Max. Tire Load 6000 lbs. (2722 kg)
Table 1-8. Hydraulic Filter
Type Return
Micron Rating 25 Micron
Table 1-9. Hydraulic Pump/Electric Motor
Motor 48 VDC, 2.14 H.P. @ 2700 rpm
Displacement
0.19 cu. in./rev. (3.12 cm
3
/rev.)
Output 2.71 gpm (10,25 lpm) @ 2000 psi (137.9 Bar)
Table 1-10. Dimensional Data
Turning Radius (Inside) 5 ft. (1.52 m.)
Turning Radius (Outside) 10 ft. - 0 in. (3.05 m)
Machine Height (stowed) 6 ft., 7.0 in. (2.0 m.)
Machine Length (stowed)
E300A
E300AJ/AJP
17 ft.,2 in. (5.23 m.)
18 ft., (5.48 m)
Up and Over Platform Height 13 ft.,1.0 in. (3.99 m.).
Horizontal Reach Up and Over 20 ft. (6.1 m.).
Machine Width 4 ft., (1.22 m.)
Wheel Base 6 ft., 7.25 in. (2.01 m.)
Platform Height 30 ft., 0 in. (9.14 m.)