Planet gear -9 – JLG E300 Service Manual User Manual
Page 43
Advertising
SECTION 3 - CHASSIS & TURNTABLE
3120772
– JLG Lift –
3-9
5.
Remove 4 Thrust Washers (4B), 28 Needle Rollers
(4C) and the Thrust Spacer (4D) from the Second
Stage Planet Gear (4F).
6.
Repeat Steps 1 though 5 for the remaining two
Planet Gears (4F).
7.
Remove the Thrust Washer (4H) from the counter-
bore in the Output Carrier (4A).
Figure 3-5. Planet Gear
1F Output Carrier
4B Thrust Washer
4C Needle Bearing
4D Thrust Spacer
4F Planet Gear
Advertising