JLG E300 Service Manual - Manual (Page 17)

SECTION 1 - SPECIFICATIONS
3120772 – JLG Lift – 1-5
Critical Stability Weights
DO NOT REPLACE ITEMS CRITICAL TO STABILITY WITH ITEMS
OF DIFFERENT WEIGHT OR SPECIFICATION (FOR EXAMPLE: BAT-
TERIES, FILLED TIRES, PLATFORM) DO NOT MODIFY UNIT IN
ANY WAY TO AFFECT STABILITY.
1.14 SERIAL NUMBER LOCATIONS
For machines identification, a serial number plate is
affixed to the turntable, on the front of the left battery box
support plate. If the serial number plate is damaged or
missing, the machine serial number is stamped on the top
right front of the frame.
1.15 HYDRAULIC OIL
NOTE: Hydraulic oils require anti-wear qualities at least API
Service Classification GL-3, and sufficient chemical
stability for mobile hydraulic system service.
NOTE: Machines may be equipped with Mobil EAL224H
biodegradable and non-toxic hydraulic oil. This is
vegetable oil based and possesses the same anti-
wear and rust protection characteristics as mineral
oils, but will not adversely affect the ground water or
the environment when spilled or leaked in small
amounts. Mobil EAL224H has a viscosity of 34 cSt
at 40° C. and viscosity index of 213. The operating
temperature range of this oil is -18° C. to +83° C.
NOTE: Aside from JLG recommendations, it is not advis-
able to mix oils of different brands or types, as they
may not contain the same required additives or be
of comparable viscosities. If use of hydraulic oil
other than Mobil DTE 11M is desired, contact JLG
Industries for proper recommendations.
Table 1-17. Critical Stability Weights
Components LBS. KG.
Counterweight 5300 2404.1
Tire and Wheel 120 54.4
Tire and Wheel (CSA) 262 119
Platform 135 61.2
Battery (each) 110 50
Table 1-18. Hydraulic Oil
Hydraulic System
Operating
Temperature Range
S.A.E. Viscosity
Grade
+0° to + 180° F
(-18° to +83° C)
10W
+0° to + 210° F
(-18° to +99° C)
10W-20, 10W30
+50° to + 210° F
(+10° to +99° C
20W-20