JLG 800A_AJ Service Manual - Manual (Page 109)

SECTION 3 - CHASSIS & TURNTABLE
3120858 – JLG Lift – 3-53
13. Install regular Grade 8 Bolts (12) into remaining
holes.
14. Pipe Plugs (20) are to be installed into Cover (6)
using a lubricant seal of some sort.
15. Torque Shoulder Bolts (13) to 23-27 ft.-lbs. and regu-
lar Grade 8 Bolts (12) to 23-27 ft.– lbs.
16. The unit must be completely filled with EP 90 lubri-
cant before operation.
Hub Shaft Sub-Assembly
1. Press Bearing Cone (1D) onto Shaft (1A).
2. Press Bearing Cup (1C) into Hub (1G) taking care to
insure cup start square with the bore of Hub (1G).
3. Invert Hub (1G) and press Bearing Cup (1E) into
intercounterbore of Hub (1G).