JLG 800A_AJ Service Manual User Manual
Page 31
SECTION 1 - SPECIFICATIONS
3120858
– JLG Lift –
1-11
2. Wheel Bearings
Lube Point(s) - Repack
Capacity - A/R
Lube - MPG
Interval - Every 2 years or 1200 hours of operation
3. Wheel Drive Hub
Lube Point(s) - Level/Fill Plug
Capacity - 17 oz. (0.5 L) - 1/2 Full
Lube - EPGL
Interval - Check level every 3 months or 150 hrs of
operation; change every 2 years or 1200 hours of
operation
Comments - Place Fill port at 12 o’clock position
and Check port at 3 o’clock position. Pour lubri-
cant into fill port until it just starts to flow out of
check port.
4. Hydraulic Return Filter
Interval - Change after first 50 hrs. and every 6
months or 300 hrs. thereafter or as indicated by
Condition Indicator.
5. Hydraulic Charge Filter
Interval - Change after first 50 hrs. and every 6
months or 300 hrs. thereafter or as indicated by
Condition Indicator.
6. Hydraulic Tank
Lube Point(s) - Fill Cap
Capacity - 40 gallons (151 L) Tank; 77 gallons
(291.4 L) System
Lube - HO
Interval - Check Level daily; Change every 2 years
or 1200 hours of operation.