Section 4. boom & platform, 1 platform, Support removal – JLG 800A_AJ Service Manual User Manual
Page 215: Location of components platform support -1, 1 platform support removal
Advertising
SECTION 4 - BOOM & PLATFORM
3120858
– JLG Lift –
4-1
SECTION 4. BOOM & PLATFORM
4.1 PLATFORM
Support Removal
1. Disconnect electrical cable from control console.
2. Remove the eight (8) bolts securing the platform to
the platform support, then remove the platform.
3. Using a suitable device, support the platform sup-
port.
NOTE: The platform support weighs approximately 77 lbs.
(35 kg).
4. Remove the six (6) bolts and locknuts securing the
support to the rotator.
5. Using a suitable brass drift and hammer, remove the
rotator shaft, then remove the support from the rota-
tor.
Figure 4-1. Location of Components Platform Support
Advertising