JLG Workstation in the Sky-Scissor Lifts - Manual (Page 21)

SECTION 1 - ES SCISSOR ACCESSORIES
3128160 – JLG Lift – 1-13
Pipe Rack Removal
In the event that the pipe racks need to be removed, bail
pins have been used for easy removal.
To remove, pull the three bail pins out of each pipe rack
bracket. At this point the brackets can be removed and
stored for later use.
Service and Maintenance
• Replace torn or frayed straps, bent or damaged
bail pins or pipe rack assemblies, missing or
illegible decals.
• Check for loose nuts and bolts and torque loose
nuts or bolts to JLG torque chart specifications.
3
Australia CE
ANSI
CSA
Japan
China
Korea
1
2
4
? ?
? ?
2902346 A
Australia CE ANSI
CSA Japan
China
Korea
3
Australia CE ANSI
CSA Japan
China
Korea 1
2
? ? ? ?
2902346 A_AUS 2902346 A_ANSI/CSA
MAX.= MAX.= 230 kg 500 lbs/227 kg
MAX.= MAX.=
MAX.= MAX.=
360 kg 600 lbs/363 kg
450kg 600 lbs/ 363 kg
105 kg
155 kg
200 kg
45 kg 45 kg
45 kg 45 kg
90 kg 200 lbs/90 kg
90 kg 200 lbs/90 kg
45 kg 100 lbs/45 kg
= =
= =
= =
+ + + +
+ +
+ +
+ +
+ +
+ +
+ +
Zone A Zone A
Zone A Zone A
MAX.=
450 kg MAX.=
800 lbs/363 kg MAX.=
320 kg MAX.=
550 lbs/250 kg = =
= =
= =
= =
+ +
+ +
+ +
+ +
Zone B Zone B
Zone B Zone B
200 kg
155 kg
70 kg
105 kg
MAX.=
360 kg MAX.=
800 lbs/363 kg MAX.= 230 kg MAX.=
500 lbs/227 kg
0 1/16" 0 1/16" 6 m MAX 20 FT MAX
6 m MAX A A =A =A
1. CHOOSE PROPER COUNTRY AND
MARKET LOCATION DECAL
2. REMOVE BACKING FROM DECAL
3. INSTALL AT PROPER LOCATION
4. DISCARD REMAINING DECALS
Figure 1-9. Pipe Rack Capacity Decal