JLG Workstation in the Sky-Scissor Lifts - Manual (Page 23)

SECTION 2 - 3394RT & 4394RT ACCESSORIES
3128160 – JLG Lift – 2-1
SECTION 2. 3394RT & 4394RT ACCESSORIES
2.1 WORKSTATION
NOTE: Workstation can be attached anywhere in the plat-
form.
NOTE: Always follow capacity decals on workstation due to
de-rated capacities.
Description
The Workstation is designed to give the operator space
for storage of tools by using various hooks and straps.
There are also small compartments built into the Worksta-
tion as well as a portable work surface.
Safety Precautions
READ AND UNDERSTAND THE OPERATORS MANUAL FOR THE
SPECIFIC JLG MODEL BEING USED.
1. Be sure the Workstation is properly fastened to the
lift.
2. No items are to be loosely positioned on platform.
3. Be sure any tools or objects on the Workstation
are properly fastened.
Preparation and Inspection
1. Check Workstation for any cracked welds around
attach point brackets.
2. Check for any damage to storage compartments
and portable work surface.
Operation
• To use the portable work surface, lift up on the
handle in the work surface and position across
the Workstation.
Service and Maintenance
• Check for loose nuts and bolts and torque loose
nuts and bolts to JLG Torque Chart Specifica-
tions.
• Replace any missing or illegible decals, bent or
crushed tubes.
ALWAYS FOLLOW LOWEST MAXIMUM CAPACITY WHEN USING
MULTIPLE ACCESSORIES. REFER TO ACCESSORY CAPACITY
DECALS.
BE SURE ACCESSORY IS APPLIED TO SPECIFIC SCISSOR
MODEL.
REAR VIEW
1
2
3
4
5
LIFT WORK
SURFACE HERE
1
Figure 2-1. Workstation
1. Cinch Strap
2. Manual Storage Tube
3. Receptacle Panel
4. Hook/Hanger
5. Portable Work Surface