Snmp – 2N StarGate/BlueTower v5.5 User Manual
Page 103
103
SNMP
General
Enabled – enable/disable the SNMP service.
Community – SNMP community is a group that owns the device and control
stations on which SNMP is running. Default value = public.
Servers
First SNMP server – the addressee's primary IP address and transport port for
SNMP traps (default port = 162). Please make sure that the parameters have
been completed correctly to avoid SNMP malfunction.
Second SNMP server – the addressee's secondary IP address and transport
port for SNMP traps (default port = 162). If these parameters are correctly
completed, the SNMP traps will be sent both to the primary and secondary IP
addresses.
Download MIB files
This section helps you download the MIB files that are necessary for a proper function
of your MIB browser.
Caution
The SNMP service works properly on condition that.
SNMP is licensed in the
section.
Management
The primary IP address, transport port and community parameters are
completed.
SNMP is enabled in the
section.
Monitoring