2N StarGate/BlueTower v5.5 User Manual
Page 120
120
Time – The eCPU does not contain a clock generator of its own. It is necessary to
synchronise it from any place. You can choose an NTP server or the basic CPU of
the gateway.
LOGs – Here you can set and download the eCPU status log records.
Configuration back-up – An option to download the complete eCPU settings.
Restart – Reboot of the eCPU. You are recommended to use this function instead
of the hard reset by switching off/on the whole system.
CDR – An automatic CDR download from the basic CPU to the micro-SD card
located on the eCPU board (enhanced CPU Board). When the CDR function is
activated, all CDR will be automatically downloaded and saved onto a micro-SD
card. The saved CDR are available for download in this section of web interface.
User accounts – Management of the users that can access the web interface or
use SMS services. The users are divided into nine groups. Group 0 is for service
accounts, groups 1-8 are designed for SMS delivery groups 1-8.
Service account
Description
Admin
Account for configuration eCPU
simstar
Account for SIM Client
sms
Account for SMS and SMS simulator
The access user name and password have the same format as with the SMTP/POP3
protocols (username@domainname).The default accounts are added by the default
settings (one per User group). Click on the
icon to add a new account to the
Add user
system.
Caution
Be sure to use original and undamaged firmware files for the firmware
upload to avoid gateway function problems! For the latest firmware
).
Caution
The micro-SD card must be formatted according to the FAT32 system!
The CDR function will not start until the SD card is inserted in the system!
Tip
If you forget the Admin user password, you can restart the gateway with
restoring the factory settings using a serial console.