2N StarGate/BlueTower v5.5 - Manual (Page 117)

117
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Configuration
The configuration is divided into two sections. You can enable/disable each function
independently.
Call simulation – Settings for automatic call generation between the gateway
wireless modules.
SMS simulation – Settings for automatic SMS generation between the gateway
wireless modules.
Call Simulation
Time interval 1-4 – Up to 4 time intervals for call simulation.
Delay between calls – Time in minutes between two automatic calls. You can
choose
(every defined count of minutes) or (randomly between Hard Random
two intervals in minutes).
Answered calls – Ratio of connected calls. Example: If you set 50%, every
other call will only be answered.
Time of ringing – Length of ringing calls before automatic connection or call
end.
Time of answered calls – Length of active/connected calls between two
modules.
– A way of using wireless engines for calls: Module choose method
Cyclical – wraparound using of defined wireless engines;
Random – random use of defined wireless engines.
Calling/called module range – A group of wireless engines to be used for the
Call simulator.
Deny modules in outgoing groups – Disable the modules for outgoing call
simulation.
Deny modules in incoming groups – Disable the modules for incoming call
simulation.
Reset call counters – Enable the call counter reset for call simulation.
Call limit for each module – Set the call limit for each module.
Call limits of time intervals – Set the call limits for up to 4 time intervals.
Reset minutes counters – Enable the called minutes counter reset for call
simulation.
Minutes limit for each module – Set the outgoing call minutes limit for each
module.
Minutes limits of time intervals – Set the outgoing call minutes limits for up
to 4 time intervals.