Gateway control, Firmware / licence – 2N BRI Lite/Enterprise v1.4 User Manual

Page 51

Advertising
background image

51

2N TELEKOMUNIKACE a.s., www.2n.cz

®

Gateway control

Gateway control helps you:

Monitor the current state of each GSM gateway parts;
Check and set the GSM gateway licence;
View and save the LOG file and CDR.

Firmware / Licence

Use this window to display information on the gateway licence status, firmware and
bootware versions and Ethernet interface MAC address. Use the web interface to
download

a new licence via Management–>Licence.

Firmware version – displays the current firmware version for the GSM gateway
connected.
Bootware version – displays the current bootware version for the GSM gateway
connected.
MAC address – shows the MAC address of the GSM gateway Ethernet interface.
CPU serial number – shows the GSM gateway serial number in the
M203–xxxxxxxxxx.bin format.
Active – protocols allowed by the licence:

SIP – SIP support;
MExx – Mobility Extension support, where 'xx' means the maximum count
of users;
G729 – G.729ab voice codec support;
DSS1 – ISDN BRI DSS1 protocol support;

TUN – GSM–CSD remote supervision support.

SMSU – count

of SMS users.

SMSS

– SMPP support.

SMSE –

SMS@email support.

SMSW –

SMS via web support.

SNMP – SNMP monitoring support.

Gateway limitation – displays the gateway operation limit (or licence limitation).
Licence status – displays the current licence status (unlocked/locked).

Caution

When the licence code expires, the licence–based protocols will be
locked!

Networks – displays the list of allowed/disallowed GSM/UMTS networks.

Tip

Upon the dealer's request, the gateway may be locked against certain
types of GSM/UMTS networks. This state is signalled by a red LED Ch
1/Ch 2 and a 'netw–err' cause in the GSM module diagnostic window.
Contact your dealer please for more information.

Licence key for gateway – helps you insert a new GSM gateway connection
licence.

Advertising