2N BRI Lite/Enterprise v1.4 - Manual (Page 72)

72
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Note
If you use tariff routing, set the tariffs properly in the GSM outgoing
subsection groups
The maximum count of LCR table records is 64.
CLIP Routing Table + CallBack
Use the table to set a fixed CLIP assignment of incoming CLIPs from GSM to the
numbers of extensions to which incoming calls are routed automatically. Also, set the
CLIP list in the GSM network for which CallBack is enabled.
GSM number (CLIP) – user Id in GSM/UMTS.
Autodial – enable/disable CLIP routing for the selected CLIP.
Dial to VoIP – VoIP destination number for the CLIP routing function.
Auto CallBack – enable/disable CallBack routing for the selected CLIP.
Limit – set the maximum call duration (minutes).
Note
Remember to activate the CallBack mode in the GSM incoming
for a proper function. groups
The maximum count of CLIP routing table records is 96.
Mobility Extension
Use this table to register the Mobility Extension users.
Name – user name for calling to VoIP.
User – registration user name for VoIP.
Password – registration user password for VoIP.
GSM number (CLIP) – user SIM card CLIP.
Follow me function – enable/disable call forwarding to the user mobile station
(according to CLIP).
SMS at no answer function – enable/disable sending of SMS on missed calls.
Ethernet Configuration
Use this window to set the gateway Ethernet interface.
Use DHCP – enable/disable the DHCP client function for gateway. 2N BRI
®
IP address – fixed IP address (v4) for the gateway Ethernet interface. 2N BRI
®
Subnet mask – network mask for the gateway Ethernet interface. 2N BRI
®
Default gateway – IP address (v4) of the IP gateway in the Ethernet.
– primary DNS server. DNS server1
– secondary DNS server. Used as a back-up when DNS server 1 is DNS server2
not functional.