2N BRI Lite/Enterprise v1.4 - Manual (Page 56)

56
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Caution
A PIN–active SIM card with a PIN value other than that set in the GSM
gateway configuration will be blocked by the gateway with the
'pin–err' cause. Enter the correct PIN on your mobile phone to unlock
the SIM card!
End of dialling (empty=off) – set the DTMF code for DTMF dialling end for DISA
incoming calls. The default value is „#".
List of emergency numbers
The window displays a list of emergency numbers, which are normally routed to the
BRI interface. If the BRI line is disconnected, the emergency numbers are dialled
automatically via any GSM/UMTS module according to the following rules:
Search of a logged–in GSM/UMTS module (regardless of free minutes);
Search of a blocked or network searching GSM/UMTS module.
The table includes an exact format of the number to be called (112,911, etc.). The 'x p '
laceholder stands for any digit in the number to be called. The ' }'_ placeholder means {
the rest of the number. For example:
Format Allowed numbers
123 123 only
14x0 1400,1410,1420,…1490
999_ All numbers starting with 999
LED indication
GSM signal mode – set the GSM module signal LED indication.
None
Module1 only
Module2 only
All modules
VoIP Parameters
VoIP functions
Day of deleting statistics on VoIP (every month) – set the day for automatic
deletion of call statistics via the VoIP interface. None = statistics will not be
deleted automatically.