Users – 2N BRI Lite/Enterprise v1.4 User Manual
Page 75
75
Caution
The count of user accounts is file-licensed. Refer to
for the current GSM gateway licence
Management–>Licence key
details.
Users
This section helps you manage the SMS users. Select a communication protocol for
user adding (SMTP/POP3 or SMPP).
Add user
–
User group
assign the user to a User group.
–
User full name
define the system user name.
–
Replace dial for outgoing SMS
define the number
(CPN) to which the
user's outgoing SMS messages shall be sent.
–
Access type
select the communication protocol for SMS processing:
Email (SMTP/POP3)
– use SMTP for SMS sending and POP3 for
SMS receiving.
SMPP (SMSC)
– set the GSM gateway into the 'SMS centre' mode.
SMPP (ESME)
– set the GSM gateway into the 'ESME - External
Short Messaging Entity' mode.
Login name (without domain) – define the login name for the client
Email.
System ID –
SMSC user
.
ID
Password – SMSC/SMTP user password.
–
System ID (for authentication on remote side)
ESME user ID.
–
Password (for authentication on remote side)
ESME user ID.
set the TCP parameter into the client/server mode.
TCP type –
Server address – set the server IP address and TCP server transport
port.
Message direction of Esme – set the ESME user details:
Transceiver – ESME works as a transmistter/receiver.
Transmitter – ESME works as a transmitter.
Receiver – ESME works as a receiver.
Address range – set this parameter if required so by SMSC for SMS
receiving.