Control – 2N BRI Lite/Enterprise v1.4 User Manual
Page 80
80
Add record
Disabled
– enable/disable the selected routing rule.
Message to SMS group
– select the SMS group via which the SMS will be sent.
Action type – select the action for the outgoing SMS:
Submit from user – enable sending SMS from the selected user.
Submit from all users – enable sending SMS from all the SMS group
users.
Submit from user
– select the user in case Action type = Submit from user
is selected.
Time limitation
– set the rule validity time.
Days limitation
–
set the days in a week on which the rule shall be valid.
Dial mask – set the filter for the SMS addressee telephone number (Dial). If the
selected mask matches the Dial, the SMS will be routed accroding to the rules set
above. If not, the SMS will be rejected and deleted. The * character replaces any
string of characters (789789789 = 789*, e.g.). The ? character replaces any
character (789789789 = 789??????, e.g.).
Text begin
– set the string to be matched against the SMS text beginning. If a
match is found, the SMS will be routed according to the rules set above.
Note
The rules are applied to outgoing SMS sequentially, starting from the
first rule. If all the set rules are met in a row, the SMS is routed
according to the row.
Control
This section helps you monitor the system. It includes storage filling information and
AutoCLIP records.
SMS queues
The subsection displays the current SMS storage state.