Before you start, Mounting, Electrical installation – 2N Lift8 v1.5.2 User Manual
Page 49
49
4.
5.
immediately. Speak HandsFree or use a handset for better acoustic properties.
Press
for more than 2 s to display the voice menu.
Before You Start
Requirements
Connect a handset supplied by the manufacturer to the Audio Unit to avoid
handset operation error.
Product Completeness Check
Check the product for completeness before installation.
1 Audio Unit
1 handset
2 wall plugs
2 wall plug screws
7–8 jumpers for common machine room configuration
Mounting
The Audio Unit is typically mounted on a wall using the wall plugs and screws included
in the delivery.
Electrical Installation
Description of Connectors
There are 3 connectors to the right under the cover:
Caution
If no number is specified in the ALARM memory – set 2 (021–026), the
Audio Unit dials the numbers defined in the ALARM memory – set 1
(011–016).
Push the ALARM button to call the control room or machine room Audio
Unit configured as an intercom.
The ALARM and TRIPHONY buttons shine even at relax.