Overview of announcements, Call end (outgoing/incoming) – 2N Lift8 v1.5.2 User Manual
Page 87
87
Overview of Announcements
Announcement
(English)
Meaning of announcement
Caution, the call is
ending
Approaching call end announcement.
We are afraid the
call has to be
suspended
The call is interrupted by a requirement with higher priority.
Please wait
Wait until the call is put through.
Communicator
number…is calling
Identification (if configured). In the future,
In the future, user
recorded messages including the lift address, e.g., will be
played.
Checking call
Checking call differentiation.
Rescue performed
Confirmation of the end of emergency signalling.
Other Audio Units
waiting for
connection
Warning that a state of emergency has been activated in the
other lifts.
Call End (Outgoing/Incoming)
A call is terminated (line hang-up occurs) if any of the following cases happens:
The busy or continuous tone has been detected*) (call end on PBXs).
The timeout for call confirmation expired (see parameter 913 setting).
The configured maximum call time has been exceeded (parameter 912). 10
seconds before the expiry,
plays “Caution, the call is ending” for you to
L8
extend the call with
.
The
or
symbol has been received.
The time limit has expired during programming.
A higher-priority call request has arrived.