2N Lift8 v1.5.2 User Manual
Page 72
72
181–186
Confirmation
mode for
number 1–6
1–6
1
1 = with confirmation DTMF
(1), 2= confirmation of
picking up (supported only
for GSM/UMTS/VoIP), 3 =
CPC Antenna, 4= CPC
KONE, 5 = P100, 6 =
autodetection DTMF
protocol (CPC
Antenna/P100)
If there is no guarantee of
problem-free transfer of
DTMF, do not set 6 for
autodetection CPC
Antenna/P100, but
precisely specify the
protocol to be used (3 or
5).
700
SIM PIN
up to 16
digits:
0–9
0000
710
DTMF
transfer
enhanced
mode
enabled
0–1
0
0 = disabled, 1 = enabled
If there is a DTMF transfer
problem in the GSM
network, enable this
parameter.
909
Time for tone
detection
after
hang-up
1000–9999 ms
5000 ms
waits for the constant or
L8
dialling tone. If none is
detected, there is a fault on
the line (PSTN only).
911
Count of
rings before
incoming call
pick-up
1–9
2
Define the moment of line
pick-up during ringing (if
there is an incoming call
from PSTN).
912
Max. call
time
0–1000 s
120 s
The call can be extended by
a call-extending command
(parameter 924).
0=disabled (never-ending
call).
913
Login time
limit
10–1000 s
60 s
Maximum period during
which the control centre
staff must answer the call
and send confirmation,
otherwise
hangs up and
L8
proceeds to dialling the
next number. Counted from
the end of dialling.
914
Delayed call
0–1000 s
0 s
Used only with connected
CANCEL input on the cabin
Audio Unit.
915
Max.
TRIPHONY
time
10–9999 s
7200 s
Maximum TRIPHONY period
after which TRIPHONY is
terminated automatically.