Pri1 alerts, Pri2 alerts, Isdn parameters – monitoring – 2N StarGate/BlueTower v5.4 User Manual

Page 81: Port modes

Advertising
background image

81

2N TELEKOMUNIKACE a.s., www.2n.cz

®

ISDN Parameters – Monitoring

Caution

This  service  is  file-licensed.  Refer  to  Management–>Licence

 for the current GSM gateway licence details.

key

PRI1 alerts

 

Send SMS at state changes – enable/disable  alert  sending  upon  PRI1  state
change.

PRI2 alerts

Send SMS at state changes – 

enable/disable  alert  sending  upon  PRI2  state

change.

PRI common settings

– 

Timeout for ISDN line deactivation detection [s]

an  SMS  alert  on

PRI1/PRI2 deactivation is sent after this timemout.

 –  an SMS alert on PRI1/PRI2

Timeout for ISDN line activation detection [s]
activation is sent after this timemout.
Numbers where SMS will be sent to

– 

list of numbers to which the SMS alert

shall be sent.
Text of SMS

 –

 SMS alert text with the following parameters:

%P(x|y), where "x" represents any text concerning PRI1 and "y" represents
any text concerning PRI2. 
%A(x|y), where "x" represents any text for interface deactivation and "y"
represents any text for interface activation.

Settings of Alive SMS interval

Send Alive SMS

– 

enable/disable sending of ALIVE SMS.

– ALIVE SMS sending time.

Time [hh:mm]

– ALIVE SMS sending interval.

Days interval
Numbers where SMS will be sent to
– list of numbers to which the ALIVE SMS
shall be sent.

– ALIVE SMS text.

Text of SMS

Port Modes

This item helps you set each of your gateway ports. The settings are based on the LCR
table including relevant routing/rejecting rules for all incoming and outgoing calls.

Advertising