2N StarGate/BlueTower v5.4 - Manual (Page 96)

96
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Messaging
This group helps:
Set the GSM gateway to send/receive SMS via SMTP/POP3 or SMPP
Define the routing rules for incoming and outgoing SMS messages
Check the GSM gateway SMS database filling capacity
Caution
This service is file-licensed. Refer to Management–>Licence
for the current GSM gateway licence details. key
Modules Grouping
Global settings
SMS server enabled – enable/disable the SMS server at the GSM gateway
(keep disabled if you select another SMS processing method).
set the maximum AutoCLIP routing expires [hours] (1-10000, 0=off) –
time for keeping of the automatic SMS routing record (response) in the AutoCLIP
table.
Modules to SMS groups assignment
This section helps you assign GSM modules to SMS groups (according to the GSM
provider, e.g.) to facilitate incoming/outgoing SMS routing.
SMS groups to User groups assignment
This section helps you assign SMS groups to User groups for SMS sending/receiving
purposes. The GSM gateway can contain up to four User groups.