2N StarGate/BlueTower v5.2 - Manual (Page 39)

39
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Caution
For a successful VoIP card initialisation, the VoIP board MAC
address has to be filled in correctly and the basic CPU must be
switched to the VoIP–SIP mode and contain the VoIP firmware
file.
The integrated Ethernet will not work until the VoIP card has
been initialised successfully.
Configuration Jumpers
There are no configuration jumpers on the VoIP card.
Example of Correct VoIP Interface Connection
2N® StarGate / BlueTower