2N StarGate/BlueTower v5.2 - Manual (Page 99)

99
2N TELEKOMUNIKACE a.s., www.2n.cz
®
IP address, port for SNMP traps
Recipient's IP address and IP port for SNMP traps (default IP port = 162). Make
sure that this item is completed to make the SNMP process work properly.
Second IP address, port for SNMP traps
Second recipient's IP address and IP port for SNMP traps (default IP port = 162).
If this parameter is filled in, the SNMP trap will be sent both to the primary and
secondary IP addresses.
SNMP community
An SNMP community is the group that devices and management stations running
SNMP belong to. Default = public.
Number of used channels
Use these parameters to define the maximum/minimum counts of active voice
channels (VoIP, PRI ISDN). An SNMP trap will be sent automatically whenever
the defined value is exceeded.
Signal level
Maximum/minimum value of the received GSM/UMTS module signal. An SNMP
trap will be sent whenever the defined values are exceeded.
User boards
Activate/deactivate the positions to enable/disable monitoring of board
presence/absence. The CPU board monitoring is always on and cannot be
disabled.