2N StarGate/BlueTower v5.2 - Manual (Page 82)

82
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Send CLIP from VoIP/ISDN to GSM/UMTS
Transfer CLIP to GSM/UMTS – enable/disable the function.
Separating char – define the CDN/CLIP separating character.
Modify (‘–’ remove one digit) – change the CLIP. The ‘–’ character is used for
deleting one character from the left.
Caution
The Send CLIP from VoIP to GSM service must be supported by
the GSM/UMTS provider’s network. Otherwise, the call may be
rejected by GSM/UMTS!
Basic Settings
Roaming enabled for network code – set the international network identifier
for roaming purposes consisting of the following two codes:
MCC – Mobile Country Code – country code (Czech Republic – 230);
MNC – Mobile Network Code – GSM code (T–Mobile – 01, 0202, Vodafone
– 03).
Hence, the international identification code for T–Mobile CZ is 23001. Leave this
field empty to disable roaming.
Input Note
<empty> Roaming is restricted
2300 Roaming is restricted (minimum is five digits)
23002 Roaming is permitted for network with MCC+MNC code 23002
230XX Roaming is permitted for network with MCC+MNC codes 23000 – 23099
XX001 Roaming is permitted for network with MCC+MNC codes 00001 – 99001
XXXXX Roaming is permitted for any network
Note
Before activating the roaming support, please check the SIM
card for correct setting of the GSM / UMTS priority network list.
Caution
Calls via roaming networks may cause additional call costs!
CLIR – enable/disable presentation of the SIM CLIP on the called party’s
telephone. CLIR is recommended for the SIM card inserted in the GSM module to
avoid CallBack problems.
Caution
The and Temporary CLIP enable Temporary CLIR enable
services must be supported by the GSM/UMTS provider’s
network. Otherwise, the call may be rejected by GSM/UMTS!
Maximum number of called minutes – define the maximum count of minutes
to be called within a month via the selected SIM card.
Count of SMS messages – define the maximum count of SMS messages to be