Additional information, Snmp monitoring – 2N StarGate/BlueTower v5.2 User Manual
Page 98
98
Note
The SMTP IP access table is used only if the SMTP IP access
parameter in the SMS delivery group is activated!
control
Additional Information
Settings for sending/receiving SMS via SMTP/POP3 protocols
The gateway's internal POP3 server provides SMS downloading from the eCPU via
e-mail. Authorisation goes through the USERNAME and PASSWORD, which are used for
registration to the web-based interface of the eCPU. Every SMS is changed into e-mail
in the
directory after successful authorisation of the CPU. The information
Inbox
includes the SMS sender's telephone_number@domain name and the SMS receiver's
telephone_ number@domain name (to set the domain name use the web interface; the
e-mail header and subject of the message are filled in according to the CPU settings).
An already read message can be deleted from the POP3 server. You can delete a
message from the gateway eCPU or mark it as already read, but the POP3 server
cannot see it.
The server awaits e-mail in the format Text/Plain, Text/HTML, Multipart/Mixed or
. From a message in the Text/HTML format, only the body of the
Multipart/Alternative
HTML message without formatting is put into the SMS message. From Multipart/Mixed
and Multipart/Alternative messages, only the first part of the message is used,
enclosed between strings and mentioned in the header under the
name.
Boundary
The server only supports messages in the 7-bit format encoded according to
ISO-8859-1 or the 16-bit format encoded according to Unicode UTF-8 (messages with
different encoding could be illegible when received in the SMS format).
SNMP Monitoring
This section helps you program sending of SNMP traps (alerts). Find the list of available
traps in the so-called MIB table on the installation CD along with this User Manual. The
main task of the eCPU SNMP monitoring function is to continuously monitor the GSM
gateway states (gateway CPU connection via TCP/IP – Telnet) and, when an error state
occurs, send alert to the defined IP addresses. The SNMP agent on the eCPU monitors
the following states (some can be user-disabled):
GSM gateway availability (connected, disconnected).
GSM/UMTS, PRI, VOIP and AUX card presence/absence.
Count of active calls via PRI ISDN, VoIP interface.
Received signal quality for each GSM/UMTS module.
ISDN line state and GSM/UMTS module error states.