Mounting options, Table mounting, Wall mounting – ADS-TEC IWL3000 User Manual User Manual
Page 13: 2 mounting options, 1 table mounting, 2 wall mounting
Advertising
IWL3000 series
12
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
4.2 Mounting options
The device is designed for table mounting, wall mounting and for top-hat rail mounting.
4.2.1 Table mounting
Remove the protective foil on the rubber feet and attach them at the marked positions.
Fig. 1:
4.2.2 Wall mounting
Alternatively, the device can be mounted according to the VESA 75 standard on a suitable mounting
surface.
Fig. 2:
Information:
For mounting, use M4 screws of a suitable length.
The usable blind hole depth of the mounting holes is 6mm.
Advertising