Placing into operation, Initial configuration, 6 placing into operation – ADS-TEC IWL3000 User Manual User Manual
Page 22: 1 initial configuration
IWL3000 series
21
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
6 Placing into operation
6.1 Initial configuration
Caution:
The initial configuration of the device can only be performed via the RJ45
interface labelled with LAN.
For the initial configuration, a connection to a PC is required.
Connecting the 24V DC power source
The device can be powered with a 24V DC (3-pole plug) power source. The corresponding plug is
included in the scope of delivery of the device.
Connect the device with an appropriate power source.
Connecting the RJ45 network cable
When placing into operation for the first time, a connection is required between the device and a PC via
an RJ45 network cable.
Connect the device to a PC:
Device LAN connection <-> PC LAN connection