ADS-TEC IWL3000 User Manual - Manual (Page 18)

IWL3000 series 17
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
5.3 Interface overview
Fig. 6:
The device is equipped with the following interfaces (front):
1. Power 24V DC power supply (7…36V) (3-pole plug)
2. LAN1 RJ45 connection
3. LAN2 RJ45 connection
4. X1
5. X2
6. USB 2.0 connection
7. WPS pushbutton (factory default)
The device is equipped with the following interfaces (rear/side):
Fig. 7:
8. WLAN antenna (WLAN module 1)
9. SCM card reader (read in/out the ads-tec SIM cards)
10. WLAN antenna (WLAN module 2)
Information:
All input voltages can be connected redundantly