ADS-TEC IWL3000 User Manual - Manual (Page 14)

IWL3000 series 13
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
4.2.3 Top-hat rail mounting
The device is set at an angle from the top of the rail. (1) and is fixed by gently pressing on the bottom
(2). The device must be felt to snap into the rail.
Fig. 3:
To release the device from the DIN rail, proceed in reverse order.
Information:
Make sure not to damage the mounting rail of the unit when removing it..