AirLive AP60 - Manual (Page 10)

1. Introduction
AirLive AP60 User’s Manual 4
NAT, Static Router, RIP1, RIP2
IP Finder Management Utility
1.4 Wireless Operation Modes
The AP60 can perform as a Multi-Function wireless device. Through the AirLogic web
interface, users can easily select which wireless mode they wish the AP60 to perform.
AP60 Wireless Operation Mode
Wireless Mode Radio WAN Application
Access Point AP None Hotspot (Indoor and Outdoor)
Client Client None WISP Client
Bridge Bridge None Building to Building network
WDS Repeater AP + Client None Extend distance of another WDS
AP/Router
Universal Repeater AP + Client None Extend distance of any AP Router
WISP Router Client Wireless WISP Client Router
WISP + Repeater AP + Client Wireless WISP 2-Way CPE (One radio only)
AP Router AP LAN Port Broadband Sharing
WDS Station Bridge None Bridge with SSID
1.4.1 Access Point Mode
When operating in the Access Point mode, the AP60 becomes the center hub of the
wireless network. All wireless cards and clients connect and communicate through AP60.
This type of network is known as “ Infrastructure Network”. Other AP60 or 802.11b/g/n
device can connect to AP mode through “ Client Mode”.