AirLive AP60 - Manual (Page 11)

1. Introduction
5 AirLive AP60 User’s Manual
1.4.2 Client Mode
This mode is also known as “ Client” mode. For AP60, there are 2 types of Client modes:
Infrastructure and Adhoc mode. In Infrastructure mode, the AP60 acts as if it is a wireless
adapter to connect with a remote Access Point. Users can attach a computer or a router
to the LAN port of AP60 to get network access. This mode is often used by WISP on the
subscriber’s side.
In Client Ad Hoc mode, AP60 can connect to other wireless adapters without access point.
Users can attach a computer or a router to the LAN port of AP60 to get network access.