AirLive AP60 - Manual (Page 39)

4. Wireless Settings
79
AirLive AP60 User’s Manual
4.2.9 Broadcast SSID
Wireless Settings -> Broadcast SSID
When this function is disabled, the wireless network will become invisible. Only people
who know the SSID name can join the network. It is recommended to use this feature to
protect the network from intruders. However, once this function is disabled, it might be
necessary to configure the wireless connection manually. This option is available in AP
mode, AP Router mode, and Repeater modes only.
4.2.10 WMM
Wireless Settings -> WMM
Wi-Fi Multimedia (WMM) is a standard to prioritize traffic for multimedia applications. The
WMM prioritize traffic\ on Voice-over-IP (VoIP), audio, video, and streaming media as well
as traditional IP data over the AP.
The Wi-Fi Multiple Media function is available under 2.4GHz (B), 2.4GHz (G) and 2.4GHz
(B+G) band, and it is enabled under 2.4GHz (N), 2.4GHz (G+N) and 2.4GHz (B+G+N)
band.
4.2.11 Data Rate
Wireless Settings -> Data Rate
Data Rate is the physical speed of transmission. The default setting is Auto. In “Auto”
mode, the data rate will adjust according to the connection condition. It is advised to put
the data rate in Auto.
However, you can also force the radio to operate at specific data rate. The highest for 11b
is 11Mbps, 11g is 54Mbps, and 11n is MCS7.
4.2.12 Wireless Client Limit
Wireless Settings -> Wireless Client Limit
This limitation applies to number of wireless clients the device can associate. If you need to
serve wireless connection to large number of users in one location. You can deploy many
APs and limit the number of wireless clients, so any additional wireless connection attempt
will be rejected (therefore, redirect to other AP). The range of user limitation is from 1 to
31.