AirLive AP60 - Manual (Page 28)

3. Configuring the AP60
AirLive AP60 User’s Manual 22
Wireless Settings: You will find all the settings for wireless and WAN settings in
this page. The AP60’s wireless settings are different between wireless modes.
Only functions that are applicable to the wireless mode will show to simplify
configuration. For example, WAN Port is only displayed in WISP Router and AP
Router modes.
Wireless Mode: On the left hand side bar, you will find the “Wireless Mode” pull
down menu. The menu will display what is the current wireless mode. You can
change mode by the pull down menu. The AP will ask you to confirm for the mode
change and reboot to the new wireless mode.
System Configuration: All non-wireless and router mode settings are in this
category. The system configurations including changing password, upload
firmware, backup configuration, settings PING watchdog, and setting management.
Device Status: This section for monitoring the status of AP60. It provides
information on device status, Ethernet status, wireless status, wireless client table,
and system log.
Reboot: Please remember to save changes and reboot after you finish all settings.
The changes will take effect only after reboot.
Language Bar: You can select different language for the web management
interface here.
Wireless Modes
Language Bar