AirLive AP60 - Manual (Page 32)

4. Wireless Settings
AirLive AP60 User’s Manual 26
In this chapter, we will explain about the wireless settings in web management interface.
Please be sure to read through Chapter1’s Wireless Operation Mode and Chapter 3’s
“Introduction to Web Management” and “Initial Configurations” first.
Although router mode settings (WAN port, Virtual Server…etc) are part of the wireless
settings menu, they will be explained in Chapter 5.
4.1 About Wireless Modes
The AP60 has total of 9 operation modes to suit different application requirements. In this
section, we will explain how to change between wireless operation modes. For
explanation on each different operation mode, please read Chapter 1 section 1.4 first.
Below is the summary table for different wireless modes:
AP60 Wireless Operation Mode
Wireless Mode Radio WAN Application
Access Point AP None Hotspot (Indoor and Outdoor)
Client Client None WISP Client
WISP Router Client Wireless WISP Client Router
Bridge Bridge None Building to Building network
WDS Repeater AP + Client None Extend distance of another WDS
AP/Router
Universal Repeater AP + Client None Extend distance of any AP Router
WISP + Repeater AP + Client Wireless WISP 2-Way CPE (One radio only)
AP Router AP LAN Port Broadband Sharing
WDS Station Bridge None Bridge with SSID
4
4.
Wireless Settings