5 restore settings to default – AirLive AP60 User Manual
Page 22
Advertising
2. Installing the AP60
AirLive AP60 User’s Manual
16
4
LAN1
5
LAN2
6
LAN3
7
LAN4
Green
Lights on when the port is actively connected, blinking
when transmitting or receiving data.
2.5 Restore Settings to Default
If you have forgotten your AP60’s IP address or password, you can restore your AP60 to
the default settings by pressing on the “reset button” for more than 5 seconds. Performing
the Factory Reset will erase all previously entered device settings. The reset button is in
back of the case. Please see diagram below for details.
Advertising