AirLive AP60 - Manual (Page 65)

6. System Configurations
79
AirLive AP60 User’s Manual
6.2.5 Clone MAC Address
You can change the MAC address of your LAN port to other value here.
6.2.6 Enable AirLive IP Finder Management
By enabling the function, IP Finder could discover the AP60 in the LAN.
6.3 Time Settings
System Configuration ->Time Settings
You can set the NTP Time Server for your AP60’s internal clock here. You can use NTP
server function so your AP60 will check with NTP to set time automatically upon each
startup. Thus, it prevents the clock losing track of time during reboot or power outage.
Below is the procedure to set your NTP server
1. Check the “Enable NTP Client Update”
2. Select your time Zone
3. Select your NTP server
4. Click on “Apply Change”