AirLive AP60 - Manual (Page 85)

11. Specifications
79
AirLive AP60 User’s Manual
==================================================================
Question
: When I use an external antenna, how much distance can the AP60 reach?
Answer: The distance of a wireless connection depends on many factors such as cable
loss and weather conditions. There is an online distance calculator at the
AirLive website. The distance calculated is not a guaranteed value; it is for
your reference only. If you agree with this limitation, please visit
http://www.airlive.com/support/wireless_distance_calculator.jsp
====================================================================
Question
: When I wan to use “Site Survey” tool to connect with a AP that has no
encryption, why does the AP60 report “encryption type mismatch!” and ask
me to configure the wireless security settings?
Answer: When you press “Connect” from site survey, the AP60 will first check if the
current wireless encryption setting is correct. If not, it will ask you to modify
the setting. Therefore, if your current wireless settings has encryption and
the new AP you want to associate does not use encryption, then the AP60 will
report the mismatch. In this case, simple select “Disable” in the encryption
field and press “Apply Change”.
====================================================================
Question
: Where is the signal survey function that displays the Signal Strength value
continuously?
Answer: The “Signal Survey” function is inside the Site Survey function. You can
access from “Wireless Settings -> Site Survey” menu.
====================================================================
Question : Where is the POE port for AP60?
Answer: The PoE system used for AP60 is 12~24V Passive PoE. LAN1 is also used
as the passive PoE port.
====================================================================